Search Results for propeller
4" Propeller and Shaft Combination
SKU:CF436
4" Propeller and Shaft Combination, 4" Propeller / Shaft Combination SS PROP- 4" DIA x 1/2" BORE- LH Buffed Mirror Finish SS Shaft 1/2" x 36" Welded to Impeller Model # CF436
6" Propeller and Shaft Combination
SKU:CF636
6" Propeller and Shaft Combination, 6" Propeller / Shaft Combination SS PROP- 6" DIA x 1/2" BORE- LH Buffed Mirror Finish SS Shaft 1/2" x 36" Welded to Impeller Model # CF636
May 2013 Top Sellers are Mixing Propellers
May 2013 Top Sellers are Mixing Propellers, One of the top sellers for INDCO in May was our mixing propellers. INDCO is your one-stop source, . The MP-series 316 stainless steel marine style propeller was the big winner. These impellers are 3-bladed square-pitch with set screws in the hub to securely fasten the propeller to your mixing shaft yet allow for adjustment in position. These industrial grade propellers are investment cast, roto, hand models are also available in most diameters. Watch our video to determine what hand propeller
2-1/2" Dia. X 3/8" Bore 3-Blade steep Pitch Propeller
SKU:MP303
2-1/2" Dia. X 3/8" Bore 3-Blade steep Pitch Propeller, SS PROPELLER - 2-1/2 DIA X 3/8 BORE Model # MP303
2-1/2" Dia. X 1/4" Bore 3-Blade Steep Pitch Propeller
SKU:MP304
2-1/2" Dia. X 1/4" Bore 3-Blade steep Pitch Propeller, SS PROPELLER - 2-1/2 DIA X 1/4 BORE Model # MP304
1-1/2" Dia. X 5/16" Bore SS adjustable Pitch Propeller
SKU:MP153D
1-1/2" Dia. X 5/16" Bore SS adjustable Pitch Propeller, SS PROPELLER - 1-1/2 DIA X 5/16 BORE Model # MP153D
2" Dia. X 3/8" Bore SS adjustable Pitch Propeller
SKU:MP153E
2" Dia. X 3/8" Bore SS adjustable Pitch Propeller, SS PROPELLER - 2" DIA X 3/8" BORE Model # MP153E
2" Dia. X 5/16" Bore SS adjustable Pitch Propeller
SKU:MP153B
2" Dia. X 5/16" Bore SS adjustable Pitch Propeller, SS PROPELLER - 2" DIA X 5/16" BORE Model # MP153B
2-1/2" Dia. X 5/16" Bore 3-Blade Steep Pitch Propeller
SKU:MP305
2-1/2" Dia. X 5/16" Bore 3-Blade steep Pitch Propeller, SS PROPELLER - 2-1/2 DIA X 5/16 BORE Model # MP305
3" Dia. X 5/16" Bore SS adjustable Pitch Propeller
SKU:MP152
3" Dia. X 5/16" Bore SS adjustable Pitch Propeller, SS PROPELLER 3" DIA X 5/16" Model # MP152
Mixing Propeller Design: Measuring the Marine Style Mixing Propeller
Mixing Propeller Design: Measuring the Marine Style Mixing Propeller, The marine style mixing propeller features three equally-spaced blades. Therefore, direct measurement of the propeller’s diameter from one side straightthrough the center to the other is not possible, characteristic of mixing propellers. Direct measurement of actual blade pitch is quite complex, propeller site but the methodology still applies. Pitch Ratio is much more frequently referenced rather than pitch. A propeller’s pitch ratio is the ratio of the blade pitch to the diameter
Difference between impellers and propellers in mixing
Difference between impellers and propellers in mixing, Propeller vs. Impeller Technically speaking, propellers are a subset of impellers, interchangeably or frequently refer to the mixing “propeller” generically to represent any of the possible impeller types that may be on a mixer shaft. The marine style mixing propeller is named based on its visual likeness to the common boat propeller design. This familiar geometry provides efficient flow, variations of the marine style propeller include the three-blade square pitch and the steep pitched
1-1/2 HP Air 2" Flange Tri-Clamp ® Mount Mixer with Dual Propeller
SKU:TCM-2-150A-D
1-1/2 HP Air 2" Flange Tri-Clamp ® Mount Mixer with Dual Propeller, TRI-CLAMP MIXER, 2" FLG Motor: 1-1/2 HP, Air, 0-3000 RPM Shaft: 5/8" x 24" (316SS) exposed length Impeller: (2) 5" propellers (316L) Model # TCM-2-150A-D
3/4 HP Air 2" Flange Tri-Clamp ® Mount Mixer with Dual Propeller
SKU:TCM-2-75A-D
3/4 HP Air 2" Flange Tri-Clamp ® Mount Mixer with Dual Propeller, TRI-CLAMP MIXER, 2" FLG Motor: 3/4 HP, Air, 0-3000 RPM Shaft: 5/8" x 18" exposed length (316SS) Impellers: (2) 4" propellers (316LSS) Model # TCM-2-75A-D
Industrial Mixing Propellers: Square Pitch vs. Steep Pitch
Industrial Mixing Propellers: Square Pitch vs. Steep Pitch, The marine style industrial mixing propeller has long been the impeller of choice for agitation or blending of low viscosity liquids. Cast propellers are cost effective and provide significant, pitch”. The square pitch propeller has a pitch ratio of 1:1 which means for each rotation fluid, minute (turns/min.). The motor rating in horsepower required to drive a propeller in a given application is determined primarily by the propeller diameter and rotational speed. When increased flow
1-1/2 HP Air 2" Flange Tri-Clamp ® Mount Mixer with Single Propeller
SKU:TCM-2-150A
1-1/2 HP Air 2" Flange Tri-Clamp ® Mount Mixer with Single Propeller, TRI-CLAMP MIXER, 2" FLG Motor: 1-1/2 HP, Air, 0-3000 RPM Shaft: 5/8" x 24" 316 SS (exposed length) Impeller: (1) 6" propeller (316L) Model # TCM-2-150A
3/4 HP Air 2" Flange Tri-Clamp ® Mount Mixer with Single Propeller
SKU:TCM-2-75A
3/4 HP Air 2" Flange Tri-Clamp ® Mount Mixer with Single Propeller, TRI-CLAMP MIXER, 2" FLG Motor: 3/4 HP, Air, 0-3000 RPM Shaft: 5/8" x 18" exposed length (316SS) Impeller: (1) 5" propeller (316LSS) Model # TCM-2-75A
Aluminum Mixing Propellers: July’s Hot Item
Aluminum Mixing Propellers: July’s Hot Item, , INDCO’s most popular item sold was the AP129 aluminum mixing propeller. This 12" diameter 319 alloy aluminum 3-blade propeller with 1-1/4" bore is an economical, light-weight choice when resistance, with clockwise rotation as viewed from above. The aluminum propellers are sand cast, roto tumbled, the propeller to your mixer shaft yet allow for adjustment in position. A variety of custom options, . Hastelloy and 316L stainless steel propellers are also available. Count on INDCO for the highest
Dispersion Blade and Propeller Together?
Dispersion Blade and Propeller Together?, and the marine style propeller require distinctly different torque and speed requirements to complete their respective functions. Therefore, either the blade or the propeller is unable to properly, and would likely result in the propeller pumping at too high a rate. Reducing shaft speed may put the propeller in the desired product flow range but the blade is no longer providing enough shear
How to Measure a Propeller or Impeller Diameter
How to Measure a Propeller or Impeller Diameter, are often asked how to measure propeller diameter for our industrial mixers. The diameter of a circle, . The confusion lies when measuring a 3-bladed impeller. In measuring a 3-bladed propeller or impeller, you, of the bore to obtain the radius. Therefore, a propeller or impeller that measures a radius of 3” from